Saturday, May 28, 2011

Ferrari Approved Certified Pre-Owned: 599 GTB and 612 Scaglietti Specifications

    By Rossa P

    The Ferrari 599 6-liter V12 was developed from the Ferrari Enzo engine: it boosts 612 hp at 7600 rpm and combines Alcoa all aluminum chassis and aluminum bodywork for a power to weight ratio

    of less than 6 lb/hp. The innovative SCM Magnetorheological suspension control is only one of the technological features used for the first time on a high performance car. The Ferrari 599 GTB Fiorano represents the suitable application of Ferrari racing technology road production GT, as demonstrated by the F1 Superfast gearbox, the F1-Trac road-holding, safety and stability system, the steering wheel-mounted manettino,
    the advanced down-force and aerodynamic efficiency styling.
    Ferrari 599 GTB Fiorano Technical Specifications:
    Engine: Front, Longitudinal, 65 degree V12
    Bore and stroke: 92 x 75.2 mm
    Unitary Cubic Capacity: 499.92 cm2
    Total Cubic Capacity: 5999 cm3
    Valve Gear: Twin Overhead Camshafts
    Number of Valves: Four per cylinder
    Compression Ratio: 11.2:1
    Ignition: Bosch Motronic ME7.1.1 Electronic
    Coolant: Water
    Maximum Power: 612 bhp at 7600 rpm
    Specific Power: 101.6 bhp/liter
    Transmission: Rear Wheel Drive
    Clutch: double disc
    Gearbox: six gears and reverse, F1 or Manual
    Chassis: Aluminum Space Frame
    Brakes: disc
    Wheelbase: 108.3 in
    Length: 183.7 in
    Width: 77.2 in
    Height: 52.6 in
    Curb weight: 3726 lbs
    top Speed: over 205 mph
    The Ferrari 612 Scaglietti represents the first time for Ferrari in manufacturing a 12 cylinder model with the space frame chassis and body panels in aluminum, built entirely in the dedicated Scaglietti facility in Modena. Among the benefits of the 612 assembly methods there are a 60 per cent increase in structural rigidity
    and significant weight savings of 132 lbs compared to the previous model, the 456M 2+2, despite of the new car's larger dimensions.
    Ferrari 612 Scaglietti Technical Specifications:
    Engine: Front, Longitudinal, 65 degree V12
    Bore and stroke: 89 x 77 mm
    Unitary Cubic Capacity: 479 cm2
    Total Cubic Capacity: 5748.3 cm3
    Valve Gear: Twin Overhead Camshafts
    Number of Valves: Four per cylinder
    Compression Ratio: 11.2:1
    Ignition: Bosch Motronic ME7 Electronic
    Coolant: Water
    Maximum Power: 532 bhp at 7250 rpm
    Specific Power: 92.7 bhp/liter
    Transmission: Rear Wheel Drive
    Clutch: single dry disc
    Gearbox: six gears and reverse, F1 or Manual
    Chassis: Aluminum Space Frame
    Body: Four seater coupe
    Front Suspension: Independent, double wishbones, coil springs, hydraulic dampers
    Rear suspension: Independent, double wishbones, coil springs, hydraulic dampers
    Brakes: Disc
    Steering: Rack and pinion
    Front tires: 245/45 ZR 18
    Rear tires: 285/40 ZR 19
    Wheelbase: 116.4 in
    Front track: 66.5 in
    Rear track: 64.6 in
    Length: 193 in
    Width: 77.0 in
    Height: 47.8 in
    Curb weight: 4057 lbs
    top Speed: over 195 mph

    Article Source: http://EzineArticles.com/6071680

No comments:

Post a Comment

Blog Archive

Popular Posts